Ford Tire Repair: A Comprehensive Guide
As any seasoned motorist can tell you, a sudden flat tire is an inevitable part of vehicle ownership. With some Ford vehicles or equipment packages, full spare tires may not be included. Instead, a tire inflator and sealant kit may come in handy. This kit conveniently allows you to temporarily fix most flats, a solution that doesn't require a tire change, use of a jack, or the muscle of lifting a spare tire.
This simple, ease-of-use repair tool, located in the cargo area in a foam holder, typically only takes a few minutes of your time. That being the case, it is highly advised that immediate follow-ups with a repair facility for inspection should always be a priority. Remember, the kit is designed for temporary fixes only, not a long-term solution.
Components of The Ford Tire Repair Kit
The kit encompasses an air compressor designed for reinflating your tires, a black air hose, a pressure gauge, valve connectors, and sealing compound. With these entities, you can effortlessly seal and re-inflate your tire. However, should you encounter damage to the sidewall of your tire, swiftly contact roadside assistance as this type of damage can't be repaired using the kit.
How To Use The Ford Tire Inflator and Sealant Kit
Firstly, ensure that your car is safely off the road and far away from the onrush of traffic. Make use of your parking brake. For optimum battery life, leave your engine running outdoors or in a well-ventilated area while using the compressor.
To initiate the repair process, remove the valve cap from your tire's valve. Unwrap the black hose and secure it to the tire valve by turning the connector clockwise. Plug the compressor into one of the 12 volt outlets in your vehicle.
Turn the dial clockwise setting it to the 'repair' position and activate the air compressor. Monitor the tire pressure, and ensure it reaches the pressure listed on the tire label located on the inside of your driver's door.
Upon achieving the right tire pressure, turn off and disconnect the compressor, replace the tire's valve cap and store the compressor appropriately. After this, you should aim to drive at least four miles to adequately distribute the sealant throughout the tire. Check your tire pressure again and refill, if necessary, to the correct level. Then, promptly drive to the nearest Ford dealer or tire repair shop for inspection.
Remember not to exceed speeds of 50 miles per hour or travel more than 120 miles with the temporary repair in place. It's also vital that after using the sealant cartridge, it must be replaced, as well as your tire pressure monitoring sensor and the valve stem on the tire.
Ford dealerships: For All Your Maintenance Needs
Once you've completed the repair, you should head straight to your nearest Ford dealer or tire repair shop. These changes are only temporary fixes and you certainly need to get a proper tire repair or replacement as soon as possible.
Your convenience is a priority for Ford; hence there are several Ford dealerships located in areas such as Corpus Christi, Portland, Robstown, Aransas Pass, Rockport, Kingsville, Sinton, Port Aransas, Ingleside, and Alice, TX. These service centers are equipped with experienced technicians who can evaluate your car's condition and perform necessary repairs.
Need Assistance? Reach Out Now!
Have any lingering questions about the tire inflator and sealant kit? Don't lose sleep over it! Head over to ford.com/support, speak to our dedicated team of experts who are ready and eager to help.
